| The Hydrosense water detection system is designed to detect the intrusion of water in concealed areas or any place where water penetration must be identified so that corrective action can be taken immediately.
It will continuously monitor the potential hazards 24 hours a day and has the facility for 24 hours battery standby in the event of power failures. Any water penetration detected will be signaled to a control panel that can give audible and visual alarms.
The detection system comprises of three basic components, water detection cable, localized probes and a control panel.
Water leak detection systems can be divided into two basic categories:
(a) Linear Detection
Where floor areas, ducts and suspended ceilings need to be protected, this is usually best achieved by installing lengths of hydrowire. Hydrowire is a highly conductive cable extremely sensitive to moisture.
(b) Point Detection
Where there is a need for more localized detection such as
HVAC plant,drip trays, elevator shafts and storage areas a probe can be installed and adjusted to the required level of protection.
|
Water leakage detection equipment
